3M™ Sealant SZ1000 for EV Enclosure Sealing
- 3M製品番号 SZ1000
- 3M ID B5005157034
詳細
特長
- Offers a resealable gasket that can be opened and closed, allowing for battery serviceability
- Can be dispensed automatically and provides protection against water ingression
- Cures at room temperature or at elevated temperatures
- Cure-in-place
- Meets flammability requirements for flame retardancy
- Self-extinguishes and does not drip
- Meets specification IPX8 for water protection
- Provides good aging durability
- Provides good compression set (85 °C, 24 hours at 50% compression ratio) of < 15%
3M™ Sealant SZ1000 for EV Enclosure Sealing is a two-part, cure-in-place, flame retardant, foam adhesive sealant designed for sealing EV enclosures such as battery packs in electric and hybrid vehicles. This EV sealant can be dispensed automatically and provides robust protection against ingression of moisture. It offers a resealable seal that can be opened and closed allowing for serviceability of the battery and provides good aging durability.
仕様
参考資料
Intended Use: These products are intended for use in general battery enclosure sealing in automotive, off-highway, industrial and marine applications. Since there are many factors that can affect a product’s use, the customer remains responsible for determining whether the 3M product is suitable and appropriate for the customer’s specific application and system, including customer conducting an appropriate risk assessment and evaluating the 3M product in customer’s application and system. Restricted Use: 3M advises against the use of this 3M product in any application other than the stated intended use(s), since other applications have not been evaluated by 3M and may result in an unsafe or unintended condition.
